Printer Epson L800

In October 2010 Printer Epson has released the original ink tank system with the L100 and L200. Both printers are intended for low-income consumers. This time it was serious Epson Epson printers expand the network with the tank system which harid L800 printer class high end.
L800 Epson printer comes with six bottles of ink, while for low end products namely L100 and 200 new use 4 bottles only. With 6 bottle ink printer is capable of printing 1800 L800 photos sized 4 R.
L800 printer is also equipped with Epson's Micro Piezo print head that can reach a maximum print resolution up to 5760 x 1440 dpi and allows the print head to remove the ink droplets in three different sizes. (Printer Epson L800)

Printer Epson L800 As quoted from detikinet that the printer is presented to meet the needs of users who require high print speeds and volumes. This printer will be priced around $ 272 excluding VAT are likely to be marketed in June 2011.

Software Resetter for Epson C79 Counter Reset

Please read carefuly following instructions in order
to run this program without problems:

You have Windows XP to be installed on your PC.

DON’T RUN THE PROGRAM UNTIL!

1. Download Adjustment program
2. Change your PC Date to November 10, 2006.
3. Delete the folder C:\Adjustments_Programs\ on your PC if it exists.
4. Reboot your PC.
5. Check properties of this file. There must be CREATION DATE - Nov.10.2006.
6. If it is - it’s ok! If NO - try to do this one more time.
7. UNZIP file C79eap.zip.
8. RUN AdjProg.exe file. Here is it!

To reset waste ink counter;

* choose Particular adjustment mode
* Maintenance
* Waste ink pad counter
* Check
* Initialization

Intruction What for Epson Chip Resetter

One of the largest expenses that a computer user has, once they are set up and ready to go, is replacing the ink cartridges when they are empty. The printers themselves have been offered at low or no cost. This is called a loss leader. Printer manufacturers understand that they are not really in the business of manufacturing printers for profit, they are in the business of manufacturing printer ink. Once you have their printer you must buy their ink at steep prices.
Not sneaky enough
Fortunately for computer users, and not for printer ink manufacturers, a way has been found to refill ink cartridges without paying the steep prices of the ink manufacturers. The ink manufacturers are not happy about this. They fought back with smart computer chips that let only their ink cartridges work in their printers when they are filled or manufactured by their licensed printer ink companies. This was sneaky, but not sneaky enough.
It is full
In the case of Epson Printers, a device has been invented that “resets” the computer chip that says the ink cartridge is a real Epson ink cartridge that was bought at full price, and not a refilled cartridge. This devise is called a “chip resetter.” What the chip resetter does is tell the “smart chip”, which Epson installs in its printers, that the ink cartridge is a new cartridge. Essentially the smart chip is fooled, by the chip resetter into thinking that the empty cartridge it is holding is new and licensed as such. All you need to do is remove the cartridge, refill it and reinstall it into the Epson printer. You are set to go.
This is all fairly straight forward. Plug the chip resetter into your Epson printer and away you go. It identifies the ink cartridge model number ,to make sure it will work on that particular cartridge and chip, looks for possible damage to the cartridge and chip and lets you know that the smart chip has been reset to full status instead of empty status.

epson r200 service required

badger: A Service Error where you get a message telling you that "Parts inside your printer at the end of their service life, contact your dealer for replacement", or "Parts inside your printer require maintenance or replacement, call your service company", is normally a Maintenance Request Error. The maintenance request error is actually a Waste Ink Ink Pad Error and usually your remedy is to replace the Waste Ink Pad/Pads with a new one/ones and then reset the Internal Waste Ink Pad Counter. If you just reset the counter and don't replace the pads, then your printers old pads will eventually overflow and normally start leaking ink out the bottom of your printer. You can see "Exploded Parts Diagrams" of most Epson Ink Jet Printers and can also check on possible parts ordering, by Compass Micro Inc, at http://www.compassmicro.com/parts_select.cfm . Some people actually wash the ink out of the old pads, by holding them under running cold water. Then they simply dry them out and reinstall them back into their printer. The choice on what to actually do, is yours to make. I would at least recommend getting that Waste Ink Counter reset procedure and performing it first, to make sure your printer will then work...THIS ADDITIONAL INFO MIGHT ALSO BE OF SOME HELP: Tim H 12/10/2003 2:46:24 Subject: Epson Reset Program Download Location. after a long search for a reset program for waste ink, without paying, i found it. goto: http://inkjetprinterhelp.us/sscserve.exe . please check that your printer is compatible goto: http://inkjetprinterhelp.us/epsonSSC.html . this program has other features as well...Here's some previously posted info by NEWUSER, on that SSC Utility: Re: Epson C40+ Error and power light flashing by newuser (4/5/05 11:10 AM). To reset the error download this utility:
http://inkjetprinterhelp.us/epsonSSC.html . Once installed run the program and configure it, closing the main window and right clicking the icon in the tray area, from there choose Configure and select your printers model. After configuration, select Protection counter -> Reset protection counter, it should be able to clear the error message. If that does not actually work, then the only suggestion I can give is to perform a soft-reset before resetting counter. Remove also the Epson status agent, it detects errors and it may hinder communication with the printer, then reboot your pc. As profile choose the one sscservice didn't use after autoconfiguration, check for printer response. Remember that you should also clean the waste ink pads located at the printer bottom, for a step by step guide download the service manual for your printer from this site: http://www.fixyourownprinter.com/reference/manuals/public/epson . For a more in-depth procedure by NEWUSER, go to his site at http://myprinter.altervista.org/simplefaq/mysimplefaq.html#counter ....Unfortunatly, that "SSC Service Utility" does not work on all Epson Printers and not on all Operating Systems and sometimes will not even work on actually listed printer models, so you will have to check it out for yourself. Just in case that source does not work: You may actually need to go on-line to try and locate a "SERVICE MANUAL" and or the actual "RESET PROCEDURE", to buy and download for reference in disassembly, troubleshooting and servicing. I have not checked, but you can normally find Service Manuals & Reset Procedures for most Epson Printers, from "Manuals 4 You" at http://www.manuals4you.com . http://www.2manuals.com/index.php?cPath=2_18 ...Good Luck!